Eachine ET1: Innovative STEM Upgrade Stirling Engine Model

Description:
 Brand: Eachine 
 Item No.:Eachine ET1
 Item Name: Full Metal Hit & Miss Gas Engine
 Color: Sliver
 Material: Aluminium Alloy
 Weight: About 2.2kg(Engine+Wooden Base)
 Size Of Engine: 180*125*75mm(L*W*H)
 Size Of Wooden Base: 180*66*50mm(L*W*H)
 Cylinder Diameter: 22mm
 Ltinerary: 20mm
 Voltage: 3.5V
 Fuel: ZIPPOOil or Gasoline
 The best tappet clearance: 0.5mm
 Weight: 1610g
 Revolutions Per minute:1200rmp
 
 Spare Parts:
 For Rubber Ring
 
 Engine Startup Steps:
 1. Open the bottom of base to check the wiring of the engine, connect the fuel tank piep, and install 3 AA batteries.
 2.Fill the fuel tank with gasoline(95#). When the filling is completed, make sure there's no air in the oil pipe.
 3.On the right side of the engine(installation of the flying hammer position), slowly turn conterclockwise by hand to buy more than one turn.Its role can make the mixed gasoline fully enter the cylinder.
 4.Turn on the power switch and turn the flywheel to start the engine counterclockwise on the right side of the engine(installing the flying hammer position)
 
 Precautions:
 1.If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it's very likely that the carburetor needle should be adjusted.
 2.Screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel. This can be done several times to make the mixing ratio od gasonline and air re ach the normal working mix ratio. 
 
 Note:
 1.Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.
 2.Please allow little differs due to manual measurement.
3.Kids should be accompanied by adult. 
4.Kids under 8 are not recommended to play.
5.Please be carful when you add the fuel.
6.An O-ring, which is not so airtight and can be started better
 
 Package Included:
 1 X Eachine Hit & Miss Gas Engine (With Base)